Tech Support
CIMTEC Automation provides a wide range of Support options to help you with your GE Fanuc PLC system.
Repairs
CIMTEC Automation expands our automation product support by providing a full repair center through our Qualitrol International division.
Authorized Supplier of GE Fanuc PLC Products - High-Tech Distributor Since 1987
 |
GE Fanuc – PAC Systems RX3i |
The new GE Fanuc PAC systems RX3i controller is the latest addition to the innovative PAC systems family of programmable automation controllers (PACs). Like the rest of the family, the PAC systems RX3i features a single control engine and universal programming environment to provide application portability across multiple hardware platforms and deliver a true convergence of control choices. Using the same control engine as the PAC systems RX7i, the new PAC systems RX3i offers a high level of automation functionality in a compact, cost-effective package. The PAC systems portable control engine provides high performance on several different platforms, allowing OEMs and end users with application variability to choose the exact control system hardware that best suits their needs.
GE Fanuc PAC systems RX3i Features:
- High-speed processor and patented technology for faster throughput without information bottlenecks
- A universal backplane with a high-speed PCI bus running at 27 MHz for fast data throughput for complex I/O and a serial bus for simple I/O that optimizes performance and your investment. The universal backplane also supports HOT SWAP to minimize downtime.
- Celeron (Pentium III) 300 mHz CPU for advanced programming and performance with 10Mbytes memory
- Memory for ladder logic documentation and machine documentation in the controller to reduce downtime and improve troubleshooting
- Open communications support including Ethernet, GENIUS, Profibus, DeviceNet, and serial
Learn more about the revolutionary PAC RX3i from GE Fanuc by clicking on a PAC bulletin listed below. Or click on a specific part number to learn more about a particular PAC RX3i module.
| Part #: | Description: | New | Reman | Repair | |
| IC694ACC300 | Input simulator Module, 16 p | $280.80 | $219.02 |  |
|
| IC694ACC310 | RX3i Blank filler Module | $37.80 | $29.48 | |
|
| IC694ACC311 | Terminal blocks, 20 terminal (qty 6) for IC694xx I/O Modules only | $310.50 | $242.19 | |
|
| IC694ALG220 | Analog Input, Voltage, 4 pt | $558.00 | $435.24 | |
|
| IC694ALG221 | Analog Input, Current, 4 pt | $575.10 | $448.58 | |
|
| IC694ALG222 | Analog input, Voltage, 16 pt single ended/8 channel differential | $1,069.20 | $833.98 | |
|
| IC694ALG223 | Analog Input, Current, 16 pt single ended | $1,098.00 | $856.44 | |
|
| IC694ALG390 | Analog Output, Voltage, 2 pt | $559.80 | $436.64 | |
|
| IC694ALG391 | Analog Output, Current, 2 pt | $559.80 | $436.64 | |
|
| IC694ALG392 | Analog Output, Voltage/Current, 8 pts | $1,098.00 | $856.44 | |
|
| IC694ALG442 | Analog Combo Module, Current/Voltage, 4 in/2 out | $934.20 | $728.68 | |
|
| IC694APU300 | High speed counter Module 200KHZ A B and C type | $631.80 | $492.80 | |
|
| IC694APU305 | I/O Processor high speed counter for Gray Code Encoder or A QUAD B Encoder. 30 kHz Abolute Encoder or 200 kHz A QUAD B Encoder. | $1,015.20 | $791.86 | |
|
| IC694BEM320 | I/O Link Interface Module (Slave). Module uses RX3i high speed serial bus | $846.00 | $593.89 | |
|
| IC694BEM321 | I/O Link Interface Module (Master). Module is on the high speed serial bus | $1,109.00 | $778.52 | |
|
| IC694BEM331 | RX3i Genius Bus Controller (supports I/O and Datagrams). Module connectsto the serial bus. Requires CPU firmware 2.9 or higher and requires Proficy Machine Edition Version 5.00 SP1A Logic Developer-PLC, Hot Fix 1or later for configuration. | $1,028.70 | $802.39 | |
|
| IC694CHS392 | Base Expansion 10 Slots | $303.30 | $236.57 | |
|
| IC694CHS398 | Base Expansion 5 Slots | $167.40 | $130.57 | |
|
| IC694DNM200 | DeviceNet Master Module for RX3i. Module can only be located in the CPUbase. The Module is on the high speed serial bus | $1,467.90 | $1,144.96 | |
|
| IC694DSM314 | Motion Controller Module, 1-2 axis Digital Servo or 1-4 Axis Analog Servo | $1,973.00 | $1,385.05 | |